" alt="Cancel" title="Close" />
admin Hello Makers!
I am back again with a new Robotics model. Lets make a Humanoid Robot this time. This is an advanced model made from Avishkaar Robotronics FULL and some additional accessories.
Watch Video
Steps for making a Humanoid Robot
Step : 1
Take a long rectangular plate, A long U, a motor, a wheel & a caster wheel & make a structure as shown in the image.
Step : 2
Make one more structure like the previous structure and add both with the help of a short rectangular plate as shown in the image to create the base of the Humanoid.
Step : 3
Now take four short L and add these all on the base. These will act as the legs of your Humanoid.
Step : 4
Take a Long rectangular plate & fix it over the 4 short Ls
Step : 5
Take 1 short rectangular plate &1 L Angle. Add both as in the image below. Make 2 such structures.
Step : 6
Now add both these structures over the long rectangular plate.
Step : 7
Take 1 short U, 1 Big round gear, 1 square plate & 3 hole connector and make an assembly as shown below.
Step : 8
Take 1 motor, 1 short rectangle plate, and 1 mini gear. Fix the motor to the square plate with axle lock using fillers & mini gear.
Step : 9
Add the pieces made in Step 7 and Step 8 with one another as shown in the image. This will act as 1 arm of your Humanoid. Make 1 more arm in a similar way.
Step : 10
Now add both arms to both sides of a Long L & the shoulders of your Humanoid are ready!
Step : 11
Fix the shoulders to the base structure and you will find that your robot has started looking like a Humanoid.
Step : 12
Lets make the head of the Humanoid! Add 1 L angle, 1 square plate, and 1 short rectangular plate as shown in the image below.
Step : 13
Take 2 flexible strips, bend them & connect them with a short U as shown in the image.
Step : 14
Fix the structure made in Step 13 behind the head (made in Step 12). Make the eyes & mouth with help of 2 small gears & 2 rack gears. You can fix the gears with help of 3-inch axle shaft as shown in the image.
Step : 15
Now attach a Long L to the back of the head of the robot with the short U.
Step : 16
Now mount that head over the body as shown in image & fix it with Nuts & Bolts.
Step : 17
Attach the FULL Brain & connect motors with the brain & your humanoid is ready to run on your indication.
Your Robot is Ready!
Facing any Challenge in the making? Send us an email at support@avishkaar.cc or drop a chat message here and well get back to you soon as soon as possible.
Made the Robot? Share your innovation with the world! Post it on our Facebook Group.
Stay tuned for more such tutorials! 🙂
Akshay Kumar
Robotics Expert
Team Avishkaar
