Hello Makers!
I am back again with a new Robotics model known as Bulldozer Bot. Lets make a Bulldozer Bot this time. This is a simple model made from Avishkaar Robotronics FULL based on crane mechanism.
Watch Video
Steps for making a Bulldozer Bot
Step : 1
Take 2 short U and a small rectangular plate and connect them at hole no 1 and 5 as in image.
Step : 2
Now add 2 motors on both the short U and fix it by the motor nuts.
Step : 3
Now insert wheels in both the motors shaft and fix it with an axle lock.
Step : 4
Take one more short rectangular plate, add a flexible strips and add 2 caster wheels with the flexible strip as shown in the image.
Step : 5
Take 2 L-Clip and connect them with nuts and bolts.
Step : 6
Now fix both the assembly of short rectangular plate & of the L-Clip with the base of robot made as shown in the image.
Step : 7
Add a motor to the square plate of the same assembly.
Step : 8
Add a motor to the square plate of the same assembly.
Step : 9
Now fix it with the base of the robot as shown in the image.
Step : 10
Make a arm with the help of a Short rectangular plate, 2 Short L and a Big round gear as shown below.
Step : 11
Attach that arm with the motor on the top of the robot.
Step : 12
Install a CP FULL Brain with the Robot and your Bulldozer is ready to run.
Your Robot is Ready!
Facing any Challenge in the making? Send us an email at support@avishkaar.cc or drop a chat message here and well get back to you soon as soon as possible.
Made the Robot? Show off your innovation to the world! Post it on our Facebook Page .
Stay tuned for more such tutorials! 🙂
Akshay Kumar
Robotics Expert
Team Avishkaar Box