I am back again with a new Robotics model. Lets make The Archery Robot. This is an advanced model made from Avishkaar Robotronics LITE with some movement parts. Have a look at how this Robot looks like.
Steps for making an Archery Robot
Step : 1
Make a simple base with the help of two motors, 2 wheels, 2 long rectangular plates,2 long L, 2 square plates 2 L-clips & a caster wheel as shown in the image.
Step : 2
Add an L clip with a short rectangular plate as shown in the image.
Step : 3
Make 2 assembly same as last one.
Step : 4
Add a motor & a small gear on one of the assembly made in the previous step.
Step : 5
Mount the both assemblies on the base as shown in the image.
Step : 6
Add a big gear with a combination of small gears as shown in the image.
Step : 7
Now connect 2 big gears with long L as shown in the image.
Step : 8
Now add that assembly to the next of the gear system in synchronization of the mini gear.
Step : 9
Now add a motor with a long L as shown in the image.
Step : 10
Now attach a medium gear to the shaft of the motor & lock it with the axle lock.
Step : 11
Now add one more long L in parallel of the other long L and fix both of them with a long rectangular plate as shown.
Step : 12
Now add a big gear next to the gear attached to the motor as shown.
Step : 13
Add 2 pieces of flexible strip on the long rectangular plate so that the arrow can be mounted.
Step : 14
Add one more long L and add a rubber band on the same. Now your bow mechanism is ready.
Step : 15
Add some piece of flexible strip on the bottom of the bow mechanism so that it can be mounted on the arm of the crane.
Step : 16
Now mount that bow mechanism over the arm of that high torque crane.
Step : 17
Now load an arrow on the bow and fix the target. Your archery robot is ready to fire.
Your Robot is Ready!
Facing any Challenge in the making? Send us an email at email@example.com or drop a chat message here and well get back to you soon as soon as possible.
Made the Robot? Show off your innovation to the world! Post it on our Facebook Page.