" alt="Cancel" title="Close" />

How to make an Advanced Colour Sorting Robot

Hello Makers!
I am back again with a new Robotics model. Lets make an Advanced colour sorting Robot . This is an advanced model made from Avishkaar Robotronics FULL with some additional sensors & movement parts. Have a look at how this Robot looks like.

Watch Video

Steps for making The Advanced Colour Sorting Robot
Step : 1

Take 2 short L & 2 motors and join them as shown in to make the base of the robot.
Step : 2

Now take 2 short rectangular plates and fix on both part of base.
Step : 3

Add a motor vertically downward on one of the short rectangular plate as shown.
Step : 4

Join 2 square plates at right angle with the help of flexible strip and add a three hole connector with the flexible strip as shown in image. 
Step : 5

Fix that joint square plate to the shaft of motor situated at short rectangular plate and fix it with the help of axle lock.
Step : 6

Now add wheels & caster wheels to the base of the robot to make it movable.
Step : 7

Now add 2 L clips & 2 square plates at the front arm of robot.
Step : 8

Add a colour sensor in the middle of the front arm with the help of a flexible strip.
Step : 9

Now fix one IR Sensor on the each side (left & right) of robot, attach a programmable brain and do wiring.
Your Robot is Ready!
Facing any Challenge in the making? Send us an email at  support@avishkaar.cc  or drop a chat message here  and well get back to you soon as soon as possible.


Made the Robot? Show off your innovation to the world! Post it on our Facebook Page .

Stay tuned for more such tutorials! 🙂

Akshay Kumar
Robotics Ninja

Team Avishkaar 

Recommended Articles

Leave a Reply

Your email address will not be published. Required fields are marked *